Our customers and case studies
How sawmills, biomass boilers, paper mills and agribusiness measure and control production with Marrari, told by the people who use it. The videos are in Portuguese.
sawmill availability
Sawmill availability from 40% to 65%: MG Paletes · Pro X
“Without
Pro X, today we would not know what really happens in our sawmill. Since its installation, we have raised sawmill availability from 40% to 65%.”
Find a case like yours
16 case studies: 9 on video, 7 in text
-
Video testimonial Wood Sawmill availability from 40% to 65%
40% → 65% sawmill availability
-
Video testimonial Biomass · Rio Grande do Sul More steam from less biomass: over 10% savings a month
> 10% savings per month
-
Video testimonial Agribusiness · Rio Grande do Sul Less biomass in the boiler with fine feed control
Less biomass for the same steam
-
Video testimonial Wood More drying output with less energy and steam
2,400 → 3,500 m³ of wood dried per month
-
Video testimonial Wood · Lages/SC Wet boards pulled from the line before they reach the customer
No wet boards in the pack sent to the customer
-
Video testimonial Biomass · Rio Grande do Sul
Lower cost withHigh-quality pellets fromlower-moisture raw materialhigh-quality pellets M75
-
Video testimonial Wood Less machine downtime and maintenance predicted from reports
Fewer stops of machines and more output
-
Video testimonial Paper Paperboard quality problems solved through moisture
10+ years following paper moisture online
-
Video testimonial Agribusiness Production line failures spotted at once, with alerts
Failures at once alerts show where the line fails
No case study matches these filters.
What customers say
Customer testimonials. Translated from Portuguese.
-
AmbevBiomass
M75With this equipment (M75), we have the result before the biomass is fully unloaded, ensuring that we pay exactly for what we buy: quality biomass, not water.
-
TramontinaWood
≈ 20% shorter drying time (according to the customer)
We reduced our drying times and also our loss rate, which was greatly optimized. In drying time, we cut it by about 20%.
-
FamossulWood
20–25% energy savings (according to the customer)We have been a partner since the beginning of EcoPower […] we needed to reduce energy, and with the system we save 20% to 25%.
Everything Marrari develops we try to apply in our
day-to-day work, to have the best production control and, consequently, wood quality. We have been a partner since the beginning of EcoPower, one of the pioneers, because we needed to reduce energy, and with the system we save 20% to 25%.
-
Adami S/APulp
With the implementation of Marrari’s EcoPower, we were able to reduce drying times and considerably improve wood quality, mainly by reducing the crack rate. […]
With the implementation of Marrari’s EcoPower, we were able to reduce drying times and considerably improve wood quality, mainly by reducing the crack rate. Regarding energy and biomass, we had some gains, but we did not measure them because we increased production and consumption in other sectors.
-
TemasaWood
1 boiler shut down after consumption fell (according to the customer)
[…] With that, we improved the quality of the dried wood for furniture and also reduced consumption, even shutting down one of the boilers.
We had serious quality problems and excessive steam and energy consumption, and since we already knew EcoPower from Tesser Madeiras, we decided to implement it at Temasa. With that, we improved the quality of the dried wood for furniture and also reduced consumption, even shutting down one of the boilers.
-
HerliWood
3–4 → 10 kgf/cm² of pressure, with the same boiler and 4 kilns (according to the customer)[…] Cracking is something that does not exist in our wood, it is a dead subject. Nobody talks about cracks in our wood.
With the installation of EcoPower, the reality of our drying changed: before, the
3-tonne steam boiler could not supply the 4 kilns of80 m³ of pine wood, always staying at3 kg to4 kg, and the temperatures inside the kilns could not be held. Now, with EcoPower, we dry with all 4 kilns on the same boiler, which always stays at10 kg. With that, we are able to keep temperatures high and internal humidity more accurate, reducing cracks and defects in the wood. On top of that, today we sell surplus biomass we did not have before. Cracking is something that does not exist in our wood, it is a dead subject. Nobody talks about cracks in our wood.
-
SuzanoPulp
Marrari Automação takes part in the pioneering project to manufacture
short-fiber fluff pulp, developed by us, measuring its moisture in line, at the machine outlet, with the UmiPaper system.
Want a similar result in your process?
Tell us about your process and what you want to improve. A specialist replies with the solution and a quote, with no obligation.















































