Cotton, Peanut and Big Bag Moisture Meter – M85bt
Cotton, peanut and big bag moisture meter: the M86bt rod, with the sensor at its tip, goes into the load and the M85bt meter shows the moisture inside, with no sampling or climbing onto the load.
- No climbingthe rod measures inside the load
- 3
to 60% moisture, wet basis - 5,000readings with date and time, by batch
What is the M85bt cotton, peanut and big bag moisture meter?
The M85bt is a portable cotton, peanut and big bag moisture meter, made by Marrari in Brazil. It has two parts: the M85bt meter, with the display where you read the moisture, and the M86bt rod, with the sensor at its tip. The rod measures moisture inside bales, trailers and big bags, where sampling is difficult, by the dielectric principle and with a recipe for each material.
- Reports, statistics and Excel via UmiData
15 h battery life
- For whomGrowers, cooperatives, cotton gins and peanut processors
- MaterialsCotton, peanuts, big bags and other crops with calibration
- ReadingAt the tip of the 20 ×
100 mm probe, inside the material - RecordsUp to 5,000 readings in 100 batches, with UmiData reports
Why measure moisture inside the load?
The surface is misleading: the moisture that damages fiber or kernels sits in the middle of the bale, the load or the big bag. Measuring inside shows the whole load, guides drying and avoids storage losses.
- Fiber and kernels preserved: in cotton, the right moisture keeps fiber length and strength.
- Drying on target: decisions with real data, without wasting energy.
- Safe operator: no climbing onto trailers or handling heavy bales.

Where does the M85bt measure?
Where sampling is difficult or impractical. For other crops, the M85bt is calibrated with a recipe for the material. So cotton, peanut and big bag moisture is measured in the lot itself, without taking samples.
Cotton bales · Peanut trailers · Peanut drying chambers · Big bags · Export · Other crops
- Cotton bales
in-depth measurement, with no surface error. - Peanut trailersfast load screening at receiving.
- Peanut drying chambersreadings during drying, with no sampling.
- Big bagsseveral points of the volume, for a representative reading.
- Exporttraceable data for each batch for audits.
- Other cropsother farm products measured in the lot itself, where sampling is hard, with the material recipe.
Where should the probe go in a bale or big bag?
At several points and inside: the surface is misleading, and the moisture that spoils fiber or grain sits in the middle. Choose the load, mark the points and see what the M86bt rod shows at each one.
Measuring inside and at several points shows the whole load; the surface does not show what is in the middle.
Drawing not to scale.
How does measurement work?
The sensor at the tip of the rod measures by the dielectric principle, in a 70 ×
- Choose the recipe
The one for the material: cotton, peanuts or another calibrated one.
- Insert the M86bt rod
Into the bale, the load or the big bag, at several points.
- Read on the spot
Moisture on the display, saved to the batch with date and time.
- Create the report
Over USB, in UmiData: charts, batches and export to Excel.
How does the UmiData software work?
UmiData is the data collection and reporting software of Marrari portable meters: M85bt readings become charts, batch statistics and Excel or PDF reports. With your laboratory results, it creates new recipes for the meter.
How to read this screen
- Each bar is one reading, in the order taken, and the red line is the batch average.
- The green band marks the target moisture. Next to it, the share of readings above, within and below it.
- Each batch shows the minimum, average and maximum and the fields you set up, such as wood, customer and supplier.
How to read this screen
- The curve shows how the readings spread around the batch average.
- The 1σ, 2σ and 3σ deviations tell whether the batch is uniform or has pieces far from the average.
- The same batch also appears as a histogram: how many readings fall in each moisture range.
How to read this screen
- Each point is a sample: the meter reading against the moisture measured in the laboratory.
- The software draws the material line and shows the error of each sample. Those above the acceptable error are flagged.
- You can compare up to 3 recipes before sending the new one to the meter.
Who uses the M85bt
The M86bt rod goes into the cotton bale, peanut load or big bag, and the M85bt shows the moisture inside, with no sampling and no climbing onto the load. Drying decisions use real data, and the operator works more safely.
Company using the M85bt: Combio Energia.
- 3
to 60% moisture, wet basis - Before loadingshows whether to dry or wait
- 5,000stored readings, with date and time
15 h of battery in continuous use
Company using M85bt
M85bt photos
Real product photos. Click or tap a photo to enlarge it.
M85bt specifications
Measurement
| Measuring principle | dielectric, with instant reading at the tip of the rod |
|---|---|
| Measuring range | 3 |
| Accuracy | ±5 percentage points (the same as the |
| Recipes | custom measuring function for each organic material; created by UmiLab or by the customer’s laboratory, with UmiData |
| Measuring volume | 70 × |
| Probe | M86bt rod, |
Equipment and data
| Temperature | automatic compensation |
|---|---|
| Memory | up to 5,000 readings in 100 batches, with date, time and location (optional) |
| Display | backlit graphic LCD |
| Communication and software | USB; UmiData (reports, statistics and export to Excel); local or PC programming |
| Battery | rechargeable, |
| Warranty | 6 months |
Frequently asked questions about the cotton moisture meter
Can I calibrate the meter myself?
I want to buy, but what payment methods does Marrari accept?
What are the benefits of measuring cotton moisture?
What are the benefits of measuring peanut moisture?
How do you measure the moisture of big bags?
What is the UmiData software?
What is the M85bt warranty?
Does Marrari offer M85bt training?
No question with that term. Try another word or talk to the team on WhatsApp.
Request a quote: M85bt
Free and with no obligation. A Marrari specialist replies within 24 business hours.
- Installation and integrationNone needed: the M85bt is portable and arrives ready to measure, with the charger and the USB cable.
6-month warrantyFor all Marrari systems and equipment.- Support and calibrationSupport in Brazil and Latin America; new recipes from the UmiLab laboratory.





