Skip to content

Cookie preferences

Choose which optional cookies the site may use. Necessary cookies are always on.

Portable meters Marrari

Wood Moisture Meter – M52

Portable wood moisture meter with a phone app: it reads the moisture of pallets, freshly cut wood, panels and planks, organizes readings by batch and exports the history, with no cable or computer.

  • M52 APPreadings and batches on your phone, offline
  • No PChistory via WhatsApp, e-mail or Drive
  • 3 to 70%wood moisture, dry basis
Marrari M52 wood moisture meter on boards, with the M52 APP open on a phone
What it is

What is the M52 wood moisture meter?

The M52 is a portable wood moisture meter with an app, made by Marrari in Brazil. Connected to your phone via Bluetooth, it shows the moisture on screen, from 3 to 70% dry basis, saves each reading to a batch and exports the history in CSV or JSON. It measures by contact, using the species density chosen in the app.

  • Moisture alarms with sound and vibration
  • Weighs only 150 g
  • For whomSawmills, drying kilns and pallet, panel and furniture plants
  • SpeciesPine, eucalyptus and other species, density from 0.20 to 1.20 g/cm³
  • AppBatches, history with minimum, average and maximum, and export
  • AlarmsMoisture limits with sound alert and vibration
Why measure

Why measure moisture with batch records?

Wood that is too wet gets moldy; too dry, it warps and is rejected. With each reading saved to the batch, you prove the moisture of every load and find where the process went wrong, with no spreadsheets or notes on paper. See how and why to measure wood moisture.

  • Fewer rejects: the alarm flags an out-of-range piece right away, before it gets moldy or warps.
  • History of every batch: minimum, average and maximum for drying management and for the customer.
  • Errors in plain sight: with each batch’s data, it is easier to predict and fix process failures.

How does a batch of readings build up?

Each reading goes into the batch, with moisture, density, date and time, and the history shows the minimum, average and maximum. Above the limit, the M52 APP alerts you with sound and vibration. Take the readings and watch the batch build up.

Batch Simulation 0 readings

Tap "Place and read".

Minimum
–
Average
–
Maximum
–

Each reading is saved to the batch, and the history exports in CSV or JSON.

Simulation Example values, not readings from equipment.

A drawing of the batch, not the app screen.

Application

Where do batch records make a difference?

In the field and on the shop floor, where the phone is already in hand: at the sawmill, at the kiln inlet and outlet, in storage and in pallet assembly. With the M52, every reading is stored on your phone with its batch, ready to check later and show the customer.

The most common applications:

Drying kiln · Storage · Sawmill and shop floor · Pallets · Freshly cut wood · Panels and planks

  • Drying kilnmoisture content at the entry and exit of each load.
  • Storagetracking moisture during storage.
  • Sawmill and shop floorcomparing moisture between pieces and batches.
  • Palletschecking moisture before assembly and shipping.
  • Freshly cut woodknowing where drying starts from.
  • Panels and planksthicknesses from 20 to 50 mm, or both sides on thicker ones.
8.1% moisture reading in the M52 APP, with the M52 meter on the wood
Principle

How does it work with your phone?

The sensor plate measures through the change in the electromagnetic field: the water in the wood changes the field, and the density chosen in the app goes into the moisture calculation. The app works offline.

Video: how and why to measure wood moisture (in Portuguese)
M52 moisture meter on wooden boards, with the power and OK buttons and the power and Bluetooth indicators
The M52 on the wood: the power and Bluetooth indicators show the connection to the app.
  1. Connect the phone

    Download the M52 APP from the meter’s QR code and register the M52 with the MAC address on its side or with a Bluetooth scan.

  2. Choose the density

    In classic mode or on one of the 5 preset density buttons.

  3. Press and read

    Sensor plate firmly on the wood; the final moisture appears on screen.

  4. Save and export

    Each reading goes to the batch; the history is exported in CSV or JSON.

Software

How do the M52 APP and UmiData work?

In the field, the M52 APP shows moisture on the phone and organizes readings by batch, with no internet. In the office, UmiData takes the batches exported from the app and produces charts, statistics and reports.

Real M52 APP screens (in Portuguese): reading, saved batches and the readings of one batch.
How to read this screen
  1. Moisture shows up on the phone right away, over Bluetooth, with up to 5 saved densities to switch with one tap.
  2. Each reading goes into a batch, with a sample counter and an audible alarm for minimum and maximum moisture.
  3. The history stays on the phone, with no internet, and is shared as CSV or JSON via WhatsApp, e-mail or Drive. The JSON goes into UmiData on the computer.

Enlarged screen

Customers

Who uses the M52

With the M52 APP on a phone, the operator measures pallets, planks and panels and organizes readings by batch, with no cable or computer. The alarm flags out-of-limit pieces on the spot, and each batch history goes from the phone to management and to the customer.

Companies using the M52: CP Kelco, Eucatex, Berneck, Indusparquet and Rohden Portas.

  • 3 to 70%moisture, dry basis
  • On your phonereadings and lots in the app, over Bluetooth
  • No note-takingeach lot is stored in the app
  • CSV · JSONreport via WhatsApp, email or Drive

Companies using M52

  • Suzano
  • Eucatex
  • Berneck
  • Tramontina
  • Rohden Portas
  • Indusparquet
Specifications

M52 specifications

Download data sheet (PDF, 444 KB) (opens in a new tab)

Measurement

M52 specifications: Measurement
Measuring principleby contact, through the change in the electromagnetic field generated by the meter
Measuring range3.0 to 70.0% dry basis
Accuracy±1 percentage point on pine
Speciespine, eucalyptus and other species; table with 81 species densities in the manual (Chapman & Lugo, 1992), also sent by after-sales; these are reference values that vary with the region the wood comes from, and the exact value comes from the gravimetric (oven-dry) test
Calibrationspecific gravity from 0.20 to 1.20 g/cm³, set in the app; up to 5 preset densities; calibration at the UmiLab laboratory
Measuring area50 × 70 mm; wood 20 to 50 mm thick

App and equipment

M52 specifications: App and equipment
CommunicationBluetooth Low Energy with the M52 APP, which works offline
Loggingreadings by batch in the app, with moisture, density, date and time, saved on screen or with the meter button, with a beep; history with minimum, average and maximum, which opens even without the meter connected; CSV or JSON export
Alarmsminimum and maximum moisture limits, with sound alert and vibration
Powerrechargeable battery
Dimensions and weight130 × 75 × 26 mm; 150 g
Warranty6 months
FAQ

Frequently asked questions about the wood moisture meter

How to use the moisture meter?
Connect the M52 to the app, choose the wood density, press the sensor plate firmly on the piece and read the moisture on screen. There is no need to drive pins or drill the material. Avoid knots, cracks and bark, and do not leave your hand or metal under the piece.
Can I calibrate the meter myself?
Day-to-day adjustment is yours: the species density and the sensor zeroing, both in the app. Certified calibration is done at the UmiLab laboratory, and Marrari after-sales teaches how to use the app and set densities.
Are a moisture analyzer and a moisture meter the same thing?
Yes: “moisture analyzer” (determinador de umidade, in Portuguese) is another name for a moisture meter. The M52 is a portable moisture analyzer for wood, made for daily use on the shop floor.
What are the UmiData software and UmiData Server?
It is the data collection and reporting software for Marrari meters: it stores readings, generates reports, charts and histories and exports to Excel. With the M52 APP, measurements are exported from the app in JSON format and sent to UmiData on the computer. UmiData Server is the network version: readings from all meters are stored in a central SQL database that any computer on the plant network can access, which also makes ERP and MES integration easier.
What is the M52 warranty?
6 months from purchase, against material and workmanship defects, like all Marrari systems and equipment. Parts and technical support are in Brazil, at the Marrari factory, so maintenance is quick and more affordable.
Which is the best wood moisture meter: M51 or M52?

It depends on where you want to read and store the moisture: both measure wood by contact, without drilling.

M51M52
Range3 to 35% dry basis3 to 70% dry basis
Readingon the meter displayon your phone, with the M52 APP (Bluetooth)
Recordsinstant readingbatches, history and CSV or JSON export
Alarms—moisture limits, with sound and vibration
Accuracy±1 p.p. on pine±1 p.p. on pine
Dimensions130 × 75 × 26 mm; 143 g130 × 75 × 26 mm; 150 g

For whole logs and firewood, the M65 UmiLog. See all portable moisture meters.

How does buying from outside Brazil work?
Payment is by international wire transfer (SWIFT) or international credit card. Freight can be arranged by the customer, or Marrari handles the entire export.
Does Marrari offer M52 training?
Yes. User training can be live and is scheduled for the day and time you choose, with no fixed date: book it on the trainings page, stating your equipment.
Quote

Request a quote: M52

Free and with no obligation. A Marrari specialist replies within 24 business hours.

  • Installation and integrationNone needed: the M52 arrives ready to measure. Just download the M52 APP from the QR code on the meter’s screen and register the device via Bluetooth.
  • 6-month warrantyFor all Marrari systems and equipment.
  • Support and calibrationSupport in Brazil and Latin America; new recipes from the UmiLab laboratory.
Request a quote