Biomass and Granulates Moisture and Density Meter – M75D
Biomass moisture and density meter: the M75 bucket on a scale measures moisture, weighs the sample and instantly calculates bulk density and net calorific value.
850 kg/m³ maximum bulk density, wet and dry- ±2 p.p.moisture on chips (biomass: ±3)
- NCVnet calorific value from the same sample
What is the M75D biomass moisture and density meter?
The M75D is a portable moisture and density meter for biomass and granulates, made by Marrari in Brazil. It is the M75 meter on a trolley with a scale: fill the bucket with 35 liters, without compacting, and instantly read the moisture, the weight, the wet and dry bulk density and the net calorific value (NCV).
- Bluetooth,
Wi-Fi and USB, with Android app 14 h battery life
- Who it is forPulp, MDF and particleboard plants, and anyone who buys or burns biomass
- DensityWet and dry bulk density, up to
850 kg/m³, better than 5% - Recipes10
ready-made and 10 programmable, one per material - RecordsUp to 5,000 readings in 100 batches, with UmiData reports
Why measure moisture and density together?
Moisture tells you how much water you are paying for; density, how much material fits in each cubic meter. In pulp, chip density sets the alkali charge in the digester; in energy, the two together show the real energy in the load. See how to measure biomass moisture.
- Stable kappa: the right alkali charge reduces fiber loss and shives in the digester.
- Buy by energy: the NCV shows the heat the load delivers, not the weight of the water.
- Instant result, no
24 h wait for the lab, with a35 L sample instead of200 g.

Which materials does the M75D measure?
Any granular organic material within the moisture range, with the material recipe. Besides moisture, the M75D measures the bulk density of the material.
Pulp chips · MDF and particleboard chips · Mixed and tropical chips · Shavings and sawdust · Sugarcane bagasse · Husks and shells (rice, coconut, orange, peanut) · Fuel biomass · Coffee, grain, seeds and charcoal
- Pulp chipsmoisture and density set the digester alkali and steady the Kappa.
- MDF and particleboard chipsshows the material entering the panel line.
- Mixed and tropical chipsboiler biomass, with one recipe per mix.
- Shavings and sawdustdensity converts volume into weight for purchasing.
- Sugarcane bagassemoisture and density show the load’s energy.
- Husks and shells (rice, coconut, orange, peanut)each husk has its own calorific value.
- Fuel biomasswith moisture, density and NCV, you pay for energy.
- Coffee, grain, seeds and charcoalUmiLab creates the recipe from a sample.
How does the measurement work?
The sensor at the center of the bucket measures moisture by the dielectric principle, and the trolley scale weighs the sample: with the known volume, the M75D calculates the bulk density on a wet and on a dry basis.
- Tare the scale
With the empty bucket on the trolley.
- Fill the bucket
35 liters, with the scoop and leveling rule, without compacting or shaking.
- Read and save
Moisture and NCV on the display; the sample density on the next screen.
- Create the report
Over USB,
Wi-Fi or the app, in UmiData: moisture, density and NCV by batch and supplier.
How do the M75D app and UmiData work?
Besides the USB cable, the M75D downloads its readings wirelessly, in three ways: over Bluetooth, in the Android app, the same for the M75 and the M75D; over the meter’s own
How to read this screen
- Each meter is registered once: the phone finds it over Bluetooth and saves it under a name, in "My Equipment".
- When collecting, the app extracts the meter’s readings and recipes and shows each batch: recipe, start and end, minimum, average, maximum, moisture reading by reading and the standard deviation.
- The batch goes to UmiData directly over the
Wi-Fi network or as a JSON file via WhatsApp, Drive ore-mail. Then the app sets the meter’s clock and clears its memory.
How to read this screen
- Each bar is one reading, in the order taken, and the red line is the batch average.
- The green band marks the target moisture. Next to it, the share of readings above, within and below it.
- Each batch shows the minimum, average and maximum and the fields you set up, such as wood, customer and supplier.
How to read this screen
- The curve shows how the readings spread around the batch average.
- The 1σ, 2σ and 3σ deviations tell whether the batch is uniform or has pieces far from the average.
- The same batch also appears as a histogram: how many readings fall in each moisture range.
Work out the value of your biomass load
How to read this screen
- You enter the load, the measured moisture, the contract moisture and price, the GCV and the hydrogen content of the material.
- UmiData works out the real value of the load from the useful energy, the energy lost to moisture and the cost difference over the month.
- The table next to it lists the GCV of common materials, such as pine, eucalyptus, rice husk and sugarcane bagasse.
How to read this screen
- Each point is a sample: the meter reading against the moisture measured in the laboratory.
- The software draws the material line and shows the error of each sample. Those above the acceptable error are flagged.
- You can compare up to 3 recipes before sending the new one to the meter.
How to read this screen
- The meter has 10 ready recipes, which cannot be changed, and 10 slots for new recipes.
- Each recipe is the curve of one material, such as pine or eucalyptus chips.
- With the meter connected to the computer, you pick the recipe and send it to the meter.
Who uses the M75D
With the M75 bucket on a scale, the M75D gives moisture, bulk density and NCV from the same sample, on the spot. In pulp mills, the alkali charge is set by the actual wood, for a steadier Kappa. In biomass purchasing, you pay for energy.
Companies using the M75D: Eucatex, Arauco, Suzano, Cenibra and Cargill.
35 L sample, weighed on the scale- ±2 p.p.moisture on chips (biomass: ±3)
- 2 in 1moisture and density from the same sample
- Biomass, not watercheck before paying for the load
Companies using M75D
What is the biomass load that arrived really worth?
Wet biomass delivers less energy per tonne. Enter the contract moisture and the load moisture and see the fair price for the energy, the same calculation as the UmiData biomass calculator. See how to save biomass.
Want to cut this loss? Request a quote
Calculator unlocked. Enter your process numbers.
How the calculation works
LHV = GCV − 600 × (9 × H ÷ 100) and NCV = LHV × (1 − M) − 600 × M, in kcal/kg, with H = 6% hydrogen (typical of biomass) and M = moisture on a wet basis (fraction). Fair price = contract price × measured NCV ÷ contract NCV. GCV = gross calorific value; LHV = lower heating value; NCV = net calorific value. For chip blends, the GCV is the weighted average of the pine and eucalyptus GCVs, in the proportion shown in the name (pine/eucalyptus).
GCVs are the UmiData table values; for pine, rice husk and coconut husk, those from the article on calorific value; for shavings, black wattle, tropical hardwood, eucalyptus bark and peanut shells, those from research by Embrapa, IBAMA, IPEF and Brazilian universities (Protásio et al., 2011; Costa Junior et al., 2023; Quirino et al., 2005; Liberato et al., 2023; Dourado et al., 2017); approximate values. The M75D calculates the NCV instantly, with your material recipe, and UmiData runs the same price calculation with your load data.
M75D photos
Real product photos. Click or tap a photo to enlarge it.
Technical specifications of the M75D
Measurement
| Measuring principle | moisture by the dielectric method; bulk density from the sample mass on the trolley scale |
|---|---|
| Moisture range | 3 |
| Moisture accuracy | ±2 percentage points on process chips; ±3 on biomass |
| Density | bulk density, wet and dry basis, up to |
| Calorific value | estimates the net calorific value (NCV) from the recipe gross calorific value and hydrogen content |
| Recipes | 10 predefined and 10 programmable; density correction factor for laboratory results under Brazilian standard ABNT NBR 14984 |
Instrument and data
| Sample and scale | 35 liters; |
|---|---|
| Dimensions and mass | 350 × |
| Battery | meter: |
| Memory | up to 5,000 readings in up to 100 batches |
| Communication and software | USB to PC; wireless: Bluetooth with the Android app (the same as the M75) and |
| Accessories and maintenance | charger, USB cable, backpack, scoop and leveling rule; annual preventive maintenance at Marrari, with a scale check |
Frequently asked questions about the moisture and density meter
How accurate is the M75D?
What is bulk density?
How do I calibrate the M75D?
What are the UmiData software and UmiData Server?
What is the M75D warranty?
Does Marrari offer a biomass assessment?
How does buying from outside Brazil work?
Does Marrari offer M75D training?
No question with that term. Try another word or talk to the team on WhatsApp.
Request a quote: M75D
Free and with no obligation. A Marrari specialist replies within 24 business hours.
- Installation and integrationNone needed: the M75D is portable, a
battery-powered field laboratory, and arrives ready to measure, with the scoop and leveling rule. 6-month warrantyFor all Marrari systems and equipment.- Support and calibrationSupport in Brazil and Latin America; new recipes from the UmiLab laboratory.
















