Continuous Transverse On-line Moisture Meter for Wood – UmiLine T
Continuous transverse
- Divertsmarks or diverts wet boards
120 m/min on transverse lines, 20 readings/s- Contactboards pass in contact with the sensor
What is the UmiLine T continuous transverse on-line moisture meter?
- Usually no changes to your line
- Up to 100 programs
- For whomSawmills, drying kilns and sawn timber shipping
- ReadingUp to 20 per second, with the board in contact with the sensor
- DecisionMarking or diverting pieces outside the limit
- ProductionStatistics, OEE and production reports
Why measure the moisture of every board on the line?
With the moisture of every piece, you know whether it needs to go back to the kiln, has a moisture problem or was overdried, before it reaches the customer.
- Satisfied customers: wet boards set aside to be redried, before shipping.
- Less rework: no reprocessing of wet wood, with less waste.
- Preventive adjustment: batch moisture trends in real time.
Does the board pass on the average or the maximum?
It depends on the criterion:
A board with one wet spot can pass on the average and be diverted on the maximum.
Simulation Example values, not readings from equipment.
Where is UmiLine T installed?
On the transverse board conveyor, before processing or shipping.
Raw material infeed · Kiln outfeed and shipping · Sorting by grade · Production control
- Raw material infeedmoisture of the boards entering the process.
- Kiln outfeed and shippingwet boards set aside to be redried.
- Sorting by gradeboards sorted by moisture range.
- Production controlstatistics, OEE and reports.
How does UmiLine T measure?
The sensors, more of them than on UmiLine to cover the width of the conveyor, take up to 20 readings per second as the board passes, and processing compensates for piece width and decides by the average or the maximum value, on lines of up to
- Set the limits
Minimum and maximum moisture, in up to 100 programs.
- The board passes
In contact with the sensor, on the transverse conveyor.
- The system decides
By the average or the maximum, with width compensation.
- Marks or diverts
Pieces outside the limit, with a production report.
Transverse on-line moisture: what does the UmiLine T software show?
On the
To bring this meter and other plant equipment onto one screen, use the PSi4 supervisory system.
How to read this screen
- At the top, the board’s moisture, the batch total and the averages.
- The classification shows how many boards fell into each moisture class.
- The four charts split boards by moisture, thickness, width and length.
How to read this screen
- Each column is a moisture range, with the number of boards.
- The table gives average moisture, dimensions, quantity and volume for each class.
- So you see how much of the batch stayed within the required range.
How to read this screen
- Here you set the classes used for sorting.
- Each colored band is a dimension: moisture, thickness, width and length.
- The values are the limits of each class, and the reports follow those ranges.
Who uses UmiLine T
At JJ Thomazi, in Lages (Santa Catarina, Brazil),
- No wet boardsin the customer’s pack, says JJ Thomazi
- Better qualityin the final product (JJ Thomazi)
120 m/min line speed- 20/sreadings per board
Companies using
UmiLine T photos
Real photos of the equipment and installations. Click or tap a photo to enlarge it.
UmiLine T specifications
Measurement
| Measurement | continuous, up to 20 readings per second per board; more sensors than UmiLine, to cover the width of the transverse conveyor |
|---|---|
| Evaluation | by average moisture or maximum value; automatic piece width compensation |
| Speed | lines of up to |
| Accuracy | average of ±1% moisture, depending on material, density and speed |
| Limits | moisture limits set by the operator |
| Measuring range | 5 |
| Sensor temperature | up to |
Operation and management
| Programs | memory for up to 100 fully programmable operating programs |
|---|---|
| Actions | automatic marking and diverting of pieces outside the limits |
| Management | |
| Mounting | horizontal, with the boards passing in contact with the sensor; cannot be installed vertically |
| Power supply | |
| Communication | Modbus TCP; other industrial protocols, such as EtherNet/IP and Profibus, on request |
| Models | UmiLine (L), with boards moving lengthwise, and |
Frequently asked questions about the transverse moisture meter
Can the equipment be installed horizontally?
Does the wood need to touch the sensor to determine moisture?
What is the UmiLine T warranty?
How does buying from outside Brazil work?
No question with that term. Try another word or talk to the team on WhatsApp.
Request a quote: UmiLine T
Free and with no obligation. A Marrari specialist replies within 24 business hours.
- Installation and integrationBy Marrari engineering, on the transverse conveyor; in most cases, without modifying the line.
6-month warrantyFor all Marrari systems and equipment.- Support and calibrationSupport in Brazil and Latin America; new recipes from the UmiLab laboratory.






