Skip to content

Cookie preferences

Choose which optional cookies the site may use. Necessary cookies are always on.

Portable meters Marrari

Wood Moisture Meter – M51

Portable wood moisture meter for sawmills, drying kilns and furniture, flooring and packaging plants. Place it on the board and read the moisture content instantly, without drilling the wood.

  • No holesjust rest the sensor on the wood
  • 3 to 35%wood moisture, dry basis
  • ±1 p.p.accuracy on sawn timber
Marrari M51 (M51b) wood moisture meter resting on a board
What it is

What is the M51 wood moisture meter?

The M51 is a portable wood moisture meter made by Marrari in Brazil. Choose the species density, place the sensor on the board and read the wood moisture content instantly, from 3 to 35% on a dry basis, without drilling or driving pins. It is the instrument to measure wood moisture at the sawmill and the drying kiln.

  • Densities of 81 species in the manual
  • Weighs only 143 g
  • Who it is forSawmills, drying kilns and furniture, flooring, packaging and pallet plants
  • SpeciesPine, eucalyptus and other species: 81 species densities in the manual
  • ReadingBy contact, no pins or holes, with temperature compensation
  • CalibrationCertificate and tests at the UmiLab laboratory
Why measure

Why measure wood moisture?

Wood that is too wet gets moldy and grows fungi; too dry, it warps, cracks and is rejected. Measuring moisture at each stage shows whether a board is ready for the next step before it becomes a loss. See how and why to measure wood moisture.

  • Fewer rejects: off-moisture boards are set aside before they mold, warp or crack.
  • Drying on target: readings at the kiln inlet and outlet avoid over-drying and wasted energy.
  • Proven quality: the customer gets wood at the agreed moisture, and you have the number to show.

Where should the moisture meter touch the board?

On clear wood, away from knots, cracks, resin and pith. Calibration is done for sound material, and at those points the number does not represent the board. Tap each point to see why. Read why to avoid knots and cracks.

Point on the board

Clear wood: Measure here. The reading represents the board. Take several readings on clear wood and use the average.

Application

At which stages should wood moisture be measured?

At any stage where moisture defines the quality of the piece, from the sawn log to the finished product. The M51 is the device to measure wood moisture on the spot: just place the wood moisture meter on the piece.

The most common applications:

Drying kiln · Storage · Sawmill and plant floor · Furniture · Wood flooring · Packaging and pallets · Heat treatment · Construction · Musical instruments · Paper, pulp and biomass

  • Drying kilnmoisture at the inlet and outlet of each load.
  • Storagetrack moisture while the wood is stored.
  • Sawmill and plant floorcompare moisture between boards and batches.
  • Furniturewood at the right moisture before machining and gluing.
  • Wood flooringkeep the floor from moving after installation.
  • Packaging and palletsmoisture control before shipping.
  • Heat treatmentcheck moisture after the treatment.
  • Constructionstable wood in structures and finishes.
  • Musical instrumentsquality control of the chosen wood.
  • Paper, pulp and biomassspot measurements on solid wood pieces.
Principle

How does the reading work?

The sensor uses the dielectric principle: the water in the wood changes the electric field of the sensing plate, and the chosen density converts that reading into moisture, with automatic temperature compensation.

Video: how and why to measure wood moisture (in Portuguese)
  1. Choose the density

    The species density, from the table of 81 species in the manual.

  2. Place it on the board

    The sensor rests on the wood, with no drilling or pins.

  3. Read it instantly

    Moisture shows on the display, dry basis, with 0.1 point resolution.

  4. Decide the next step

    Kiln, storage or shipping, with the number of each piece in hand.

Customers

Who uses the M51

Just rest the M51 on the piece to read moisture, with no holes in the wood: at the sawmill, at the kiln and in furniture, flooring and packaging plants. Out-of-range pieces are set aside before they warp or crack, and the customer gets wood at the agreed moisture.

Companies using the M51: Klabin, CBA (Companhia Brasileira de Alumínio), Arauco, Berneck and Cia Iguaçu de Café Solúvel.

  • 3 to 35%moisture, dry basis
  • On the spotthe moisture of each board, right at the stack
  • Fewer returnsoff-spec boards do not ship with the load
  • 20 hof battery, recharged in 5 h

Companies using M51

  • Klabin
  • CBA (Companhia Brasileira de Alumínio)
  • Arauco
  • Tramontina
  • Berneck
  • Adami S/A
Specifications

Technical specifications of the M51

Download data sheet (PDF, 281 KB) (opens in a new tab)

Measurement

Technical specifications of the M51: Measurement
Measuring principledielectric, by contact
Measuring range3 to 35% dry basis; 0.1 percentage point resolution
Accuracy±1 percentage point on pine
Speciespine, eucalyptus and other species; table with 81 species densities in the manual
Calibrationapparent density at 0% adjustable from 1 to 90 (100 to 900 kg/m³); calibration and tests at the UmiLab laboratory
Reading area55 × 105 mm; boards 20 to 50 mm thick (above 50 mm, measure both sides and average the readings)

Instrument

Technical specifications of the M51: Instrument
Temperatureoperation up to 70 °C, with automatic compensation
Display7-segment LCD, 3½ digits; when lifted from the board, it holds the highest reading for 3 s; switches off by itself after 1 min on the same reading or 10 min of continuous use
Batterylithium-polymer 3.7 V, 800 mAh; about 36 h of continuous use; about 5 h to charge
Dimensions and weight130 × 75 × 26 mm; 143 g
Accessoriescharger and USB cable
Maintenanceannual preventive maintenance at Marrari (firmware update and check against standards)
FAQ

Frequently asked questions about the wood moisture meter

How to use the moisture meter?
It is easy: there is no need to pin or drill the material. Select the wood density on the M51, place the sensor on the surface of the board and read the moisture on the display. Press firmly at the center, away from knots, cracks and bark, and keep your hand or any metal away from under the board. On boards thicker than 50 mm, measure both sides and average the readings. For unplaned wood or a species not in the table, see below how to choose the density.
How do I know my wood moisture meter is accurate?
Send the meter to Marrari’s UmiLab laboratory: it runs the tests and the calibration and issues the certificate. Marrari recommends annual preventive maintenance, with a firmware update and a check against standards.
What is the M51 warranty?
6 months from purchase, against defects in materials and workmanship, like all Marrari systems and equipment. Parts and technical support are in Brazil, at the Marrari factory, so maintenance is quick and more affordable.
How does buying from outside Brazil work?
Payment is by international wire transfer (SWIFT) or international credit card. Freight can be arranged by the customer, or Marrari handles the entire export.
Which is the best wood moisture meter: M51 or M52?

It depends on where you want to read and store the moisture: both measure wood by contact, without drilling.

M51M52
Range3 to 35% dry basis3 to 70% dry basis
Readingon the meter displayon your phone, with the M52 APP (Bluetooth)
Recordsinstant readingbatches, history and CSV or JSON export
Alarms—moisture limits, with sound and vibration
Accuracy±1 p.p. on pine±1 p.p. on pine
Dimensions130 × 75 × 26 mm; 143 g130 × 75 × 26 mm; 150 g

For whole logs and firewood, the M65 UmiLog. See all portable moisture meters.

How do I choose the wood density on the M51?
From the table of 81 species in the manual: the measurement uses the apparent density of dry wood (0% moisture). The functions were designed for planed solid wood. For unplaned wood or another species, measure with densities 45 and 60, find the actual moisture of the board by the oven-dry (gravimetric) method and interpolate to get the right density.
Does Marrari offer M51 training?
Yes. User training can be live and is scheduled for the day and time you choose, with no fixed date: book it on the trainings page, stating your equipment.
Quote

Request a quote: M51

Free and with no obligation. A Marrari specialist replies within 24 business hours.

  • Installation and integrationNone needed: the M51 is portable and arrives ready to measure, with the charger and USB cable.
  • 6-month warrantyFor all Marrari systems and equipment.
  • Support and calibrationSupport in Brazil and Latin America; new recipes from the UmiLab laboratory.
Request a quote