Continuous On-line Moisture Meter for Wood – UmiLine
Continuous
- Divertsmarks or diverts
out-of-range boards 120 m/min line speed, 20 readings/s per board- Contactboards pass in contact with the sensor
What is the UmiLine continuous moisture meter?
UmiLine is Marrari’s
- Usually no changes to your line
- Up to 100 programs
- For whomSawmills and wood processing plants
- ReadingUp to 20 per second, with the board in contact with the sensor
- DecisionMarking or diverting
out-of-range pieces - ProductionStatistics, OEE and production reports
Why measure the moisture of every board?
A wet board that continues in the process becomes rework or a defect in the finished product. By measuring every piece on the line, the wet one comes out earlier, the batch is uniform and the data shows moisture trends.
- Consistent product:
out-of-range pieces separated automatically. - Less rework: no reprocessing of wet boards, with less wood waste.
- Preventive adjustment: batch moisture trends show up in real time.
What happens to a board outside the limits?
UmiLine sorts boards into 3 moisture classes. Each class drives its own output, to mark or divert, and an alarm warns when rejects exceed the tolerable level.
Boards in the wet class are marked or diverted, and the alarm warns if rejects exceed the tolerable level.
Simulation Example values, not readings from equipment.
Where is UmiLine installed?
On the board line, before processing. UmiLine measures the moisture of each moving board, continuously, and marks or diverts boards outside the limit.
Raw material intake · Quality control · Grading · Production control
- Raw material intakemoisture of boards entering the process.
- Quality control
out-of-range pieces marked or diverted. - Gradingboards sorted by moisture range.
- Production controlstatistics, OEE and reports.
How does UmiLine measure?
A rugged sensor takes up to 20 readings per second as the board passes, and the processing compensates for piece width and decides by average or maximum value, on lines of up to
- Set the limits
Minimum and maximum moisture, in up to 100 programs.
- The board passes
In contact with the sensor, at up to
120 m/min. - The system decides
By average or maximum, with width compensation.
- Marks or diverts
Out-of-range pieces, with a production report.
On-line wood moisture: what does the UmiLine software show?
On the UmiLine supervisory screen, each measured board goes into the classification in real time: moisture, thickness, width and length, with a report per batch.
To bring this meter and other plant equipment onto one screen, use the PSi4 supervisory system.
How to read this screen
- At the top, the board’s moisture, the batch total and the averages.
- The classification shows how many boards fell into each moisture class.
- The four charts split boards by moisture, thickness, width and length.
How to read this screen
- Each column is a moisture range, with the number of boards.
- The table gives average moisture, dimensions, quantity and volume for each class.
- So you see how much of the batch stayed within the required range.
How to read this screen
- Here you set the classes used for sorting.
- Each colored band is a dimension: moisture, thickness, width and length.
- The values are the limits of each class, and the reports follow those ranges.
Who uses UmiLine
On the line, before processing, UmiLine reads each sawn board at high speed, in contact with the sensor, and marks or diverts
Companies using the UmiLine: Braslumber, Sincol, Sguario, Millpar and Dissenha Moulding.
- 100operating programs
- Every boardmeasured on the line, no sampling
120 m/min line speed- 20/sreadings per board
Companies using UmiLine
UmiLine photos
Real photos of the equipment and installations. Click or tap a photo to enlarge it.
UmiLine specifications
Measurement
| Measurement | continuous, up to 20 readings per second per board |
|---|---|
| Evaluation | by average moisture or maximum value; automatic piece width compensation |
| Speed | lines of up to |
| Accuracy | average of ±1% moisture, depending on material, density and speed |
| Limits | moisture limits set by the operator |
| Measuring range | 5 |
| Sensor temperature | up to |
Operation and management
| Programs | memory for up to 100 fully programmable operating programs |
|---|---|
| Actions | automatic marking and diverting of |
| Management | |
| Installation | horizontal, on the board line, with the pieces passing in contact with the sensor; cannot be installed vertically; usually without modifying the line |
| Power supply | |
| Communication | Modbus TCP; other industrial protocols, such as EtherNet/IP and Profibus, on request |
| Models | UmiLine (L), with boards moving lengthwise, and |
Frequently asked questions about the on-line wood moisture meter
Can the equipment be installed transversely?
Does the wood need to touch the sensor to determine moisture?
Why measure wood moisture on the production line?
What is the UmiLine warranty?
How does buying from outside Brazil work?
No question with that term. Try another word or talk to the team on WhatsApp.
Request a quote: UmiLine
Free and with no obligation. A Marrari specialist replies within 24 business hours.
- Installation and integrationBy Marrari engineering, on the board line; in most cases, without modifying the line.
6-month warrantyFor all Marrari systems and equipment.- Support and calibrationSupport in Brazil and Latin America; new recipes from the UmiLab laboratory.








