Skip to content

Cookie preferences

Choose which optional cookies the site may use. Necessary cookies are always on.

Boilers Marrari

Industrial Boiler Automation – EcoSteam

Industrial boiler automation for biomass: it controls combustion, levels and bottom blowdown and sends fault alerts to your phone, so you generate more steam with less fuel.

  • Steamefficiency: t of biomass × t of steam
  • Firingair and biomass feeder on target
  • Alertsfault alerts on your phone, via Telegram
EcoSteam industrial boiler automation by Marrari, for biomass boilers
What it is

What is EcoSteam boiler automation?

EcoSteam is Marrari’s industrial boiler automation system for biomass boilers. It controls combustion and the boiler peripherals (levels, biomass handling, bottom blowdown and cleaning), with trend-based control that stabilizes pressure and saves fuel.

  • Works with the systems already in your plant
  • Full operation log
  • For whomWood-chip and biomass boilers in industry and power generation
  • MonitorsPressure, furnace draft, temperatures and water level
  • ControlsPrimary and secondary air, feeder, bottom blowdown and conveyors
  • IntegrationRuns on PSi4, with Modbus RTU and TCP
Why measure

Why automate the boiler?

A manually operated boiler depends on the operator and burns more than it needs to. With automatic control, combustion follows steam demand, pressure stays stable and faults show up before production stops. See what boiler automation is for.

  • More steam per tonne: the tonne of biomass × tonne of steam factor shows efficiency at every moment.
  • More safety: controlled pressure, temperature and level, with routines that reduce the risk of serious failures.
  • Less downtime: alarms and history anticipate failures and reduce corrective maintenance.
Laptop with the actual EcoSteam control panel and, behind it, a monitor with the boiler overview
Application

What does EcoSteam control?

The boiler’s main controls and supporting peripherals. There are two models: EcoSteam, for wood-chip boilers with a moving grate and feed control, and EasySteam, without fuel handling control. It is automation for wood-chip biomass boilers: it controls the air, the feeder and the biomass conveyors.

What the system does:

Level control · Biomass handling · Combustion air · Smart bottom blowdown · Cleaning systems · Easy-to-use panel · User alarms · Consumption anticipation

  • Level controlwater level and pumps.
  • Biomass handlingfeeder and conveyors, according to steam demand.
  • Combustion airprimary and secondary air for the right combustion.
  • Smart bottom blowdownin sequence, with pressure and level checks before opening and a fault alarm.
  • Cleaning systemsautomatic routines.
  • Easy-to-use panelcolor-coded status, failed command flagged and quick history charts.
  • User alarmsusers create their own alarms and events, in addition to the factory ones.
  • Consumption anticipationconnection to the steam consumption points, when available.
Biomass boiler at the plant, with the boiler body, exhaust ducts, platform and fan controlled by EcoSteam automation
Principle

How does the control work?

The control panel reads the boiler sensors and drives the actuators with multivariable routines based on the trend of each variable, not just its current value. The SCADA system runs on the PSi4 platform.

Video: boiler automation with EcoSteam (in Portuguese)
  1. Measures

    Pressure, temperatures, furnace draft and water level.

  2. Decides by trend

    Multivariable control that anticipates steam demand.

  3. Controls

    Air, feeder, conveyors, pumps and bottom blowdown.

  4. Alerts and logs

    Alarms via Telegram, e-mail and app; full history.

Software

Boiler automation: what does the EcoSteam software show?

In the EcoSteam software, you follow the boiler in real time: pressure, draft, steam flow, temperatures and biomass consumption, with routines and history.

To bring the boiler and other plant equipment onto one screen, use the PSi4 supervisory system.

Actual software screen (in Portuguese).
How to read this screen
  1. On the left, boiler pressure, furnace draft and steam flow.
  2. On the drawing, the temperature at each point and the percentage of air, exhaust fan, feeder and grate.
  3. At the top, biomass consumption, steam generation and the conversion factor.

Enlarged screen

Customers

Who uses EcoSteam

At Reflorestadores Unidos (Rio Grande do Sul, Brazil), EcoSteam made the boiler produce more steam with less biomass: savings exceeded 10% per month, with the sale of the surplus material and higher energy efficiency, according to the testimonial of the production planning and kiln coordinator. Companies using the EcoSteam: Imaribo, JJ Thomazi and Madeireira Nortão.

Read the case

  • R$ 12–14ka month in energy savings (Reflorestadores Unidos)
  • 3 to 5%less biomass in the boiler (Reflorestadores Unidos)
  • > 10%monthly savings, with the surplus sold
  • More steamfrom less biomass
Testimonial: cutting costs with EcoSteam – Reflorestadores Unidos (in Portuguese)

Companies using EcoSteam

  • Reflorestadores Unidos
  • Imaribo
  • Procopiak
  • JJ Thomazi
Do the math

How much biomass can EcoSteam save?

Enter your boiler data and see how much biomass it burns per month and how much automation can cut. The reduction starts at 3%, the low end of a customer report (3 to 5% less biomass); change it to the value you want to test.

Want to cut this loss? Request a quote

Use the calculator with your own process numbers

Enter your details to unlock the calculator. If you wish, a Marrari specialist can help you read the result.

By continuing, you agree to the terms of use and privacy. Marrari uses your data only to contact you about your solution.

Your boiler

Steam: the average output of the boiler. Own residue: enter what you would get for selling it.

Already filled in; change if you like

Estimated savings per month

Fill in your boiler data to see the result.

This is an estimate, not a guarantee. The 3% is the low end of a customer report (3 to 5% less biomass): it is a reference.

How the calculation works

LHV = GCV − 600 × (9 × H ÷ 100), with H = 6% hydrogen. NCV = LHV × (1 − M) − 600 × M, in kcal/kg, with M on a wet basis, as a fraction (45% = 0.45). Efficiency (%) = [(−0.003 M² + 0.118 M + 83.371) + (88 − 0.2 M)] ÷ 2, with M in %.

Consumption (t/h) = steam × (657.5 + 0.55 × pressure − 80) ÷ (efficiency ÷ 100 × NCV).

Savings = consumption × hours × reduction × price.

Fixed value in the calculation: 3% less biomass with combustion control (the lowest value reported by a customer, who reported 3 to 5%: a reference, not a promise).

The calculation only counts biomass consumption, with the same steam, pressure and moisture. GCV values and coefficients are approximate reference values.

Specifications

EcoSteam specifications

Download data sheet (PDF, 523 KB) (opens in a new tab)

Control and supervision

EcoSteam specifications: Control and supervision
ModelsEcoSteam (wood-chip boilers with moving grate and feed control) and EasySteam (without fuel handling control)
Monitorsboiler pressure, furnace draft, stack, pre-air and furnace temperatures, water level and pumps
Controlsprimary and secondary air, feeder, bottom blowdown and biomass conveyors
Alarmsconfigurable via SCADA, PLC, e-mail, Telegram and app
Historyfull operation log
SCADAPSi4 platform, with customizable screens and access from a computer or phone

Installation and integration

EcoSteam specifications: Installation and integration
CommunicationModbus RTU and Modbus TCP; RS232, 2 × RS485 and Ethernet; Profibus DP, Profinet and Ethernet/IP on request
Inputs and outputs (EcoSteam)48 digital inputs, 40 digital outputs, 16 analog inputs and 8 analog outputs, configurable; 10" touch HMI
Power supply95 to 240 VAC, 50/60 Hz; 500 W max.
Operating temperatureup to 50 °C
PanelEcoSteam 1,700 × 600 × 400 mm or 1,700 × 600 × 450 mm; EasySteam 800 × 600 × 250 mm
Warranty6 months
FAQ

Frequently asked questions about boiler automation

How does EcoSteam generate savings?
By optimizing the biomass boiler feed: it receives only the fuel needed to keep the ideal pressure and temperature. You save on buying and burning biomass.
What are the benefits of automating an industrial boiler?
Higher energy efficiency, lower maintenance costs, more safety and more boiler availability. The system shows the tonne of biomass × tonne of steam factor to track efficiency. See how to improve energy efficiency.
How does EcoSteam detect faults before a shutdown?
With modules that analyze the history of sensors and actuators, which use machine learning, and with alarms for every sensor and command. The modules are customized: each one is built for the boiler installed.
Does Marrari offer a biomass assessment?
Yes, free of charge, for anyone generating energy and steam with biomass: the team evaluates how the fuel is used and suggests how to make it more efficient and economical. Request the assessment. Outside Brazil, the assessment is carried out by a consultant from Marrari’s foreign trade (COMEX) team.
What is the EcoSteam warranty?
6 months, like all Marrari systems and equipment. Parts and technical support are in Brazil, at the Marrari factory, so maintenance is quick and more affordable.
How does buying from outside Brazil work?
Payment is by international wire transfer (SWIFT) or international credit card. Freight can be arranged by the customer, or Marrari handles the entire export. Installation is carried out by the Marrari team or a local authorized partner.
Quote

Request a quote: EcoSteam

Free and with no obligation. A Marrari specialist replies within 24 business hours.

  • Installation and integrationBy Marrari engineering or an authorized technician: the control panel is connected to the boiler sensors and actuators and integrated with the systems already in the plant.
  • 6-month warrantyFor all Marrari systems and equipment.
  • Support and calibrationSupport in Brazil and Latin America; new recipes from the UmiLab laboratory.
Request a quote