Phytosanitary Control KD & HT for Wood
KD and HT phytosanitary control: it monitors and records the heat treatment of wood in the kiln and creates the report for the export certificate, under ISPM 15.
- KD · HTphytosanitary treatment of wood
- ISPM 15meets the international standard
- 4sensors: 3 in the air and 1 inside the wood
What is KD and HT phytosanitary control?
Marrari’s KD and HT phytosanitary control is the system that monitors and records the phytosanitary treatment of wood in the kiln. Four sensors track the temperature of the air and of the inside of the wood during kiln drying (KD) or heat treatment (HT), and the software creates the report the authorized professional signs for export.
- Report accepted by Brazil’s MAPA
- Logs every stage
- Who it is forExporters of lumber, pallets and wood packaging
- Sensors3 air temperature sensors and 1 inside the wood
- ReportEvery stage recorded, for the certificate
- KilnsWith Marrari controllers or other brands, after assessment
Why treat wood for phytosanitary purposes?
To export. Importing countries require wood treated against pests, and the plant protection authority only clears the export with the certificate, signed by an authorized professional. Without a record of the treatment, there is no certificate.
- Export cleared: the report proves the treatment required by the buying country.
- No pests: heat kills insects and organisms that damage wood and spread between regions.
- No chemicals: KD and HT use temperature only, with no toxic or polluting products.

When is the treatment done?
Most often during drying, in the kiln itself, with the Marrari drying controller. It can also be done in a treatment chamber. For every load, Phytosanitary Control records the HT treatment for the export certificate.
KD in the kiln · HT in the chamber · Pallets and packaging · Lumber
- KD in the kilnkiln drying with the treatment recorded.
- HT in the chamberheat treatment in a dedicated chamber.
- Pallets and packagingpackaging wood treated for export.
- Lumberexport loads with a report per load.
How does the load reach 56 °C for 30 minutes?
The air heats up first; what counts is the core of the wood. ISPM 15 requires at least
The wood core reaches
Simulation Example values, not readings from equipment.
Accelerated time.
How does phytosanitary control work?
The kiln runs with temperature and humidity controlled by the Marrari controller. The wood is heated to the temperature and for the time set by the buying country, and the system records everything.
- Install the sensors
3 in the kiln air and 1 inside the wood.
- Program the treatment
Temperature and time required by the buying country.
- Follow and record
Every heating stage, in the software.
- Issue the report
The authorized professional signs the certificate.
Phytosanitary treatment: what does the software record for each load?
On the KD/HT Phytosanitary Control supervision screen, you follow each treatment: the cycle, the status and the load readings.
How to read this screen
- Each panel is one online unit, with the cycle number and data collection on or off.
- The lights show the stage: start, collecting and collection OK, plus
low-temperature andpower-failure alerts. - Below, temperatures T1 to T4 and the lowest of them.
Who uses phytosanitary control
In the kiln, phytosanitary control logs air temperature and the temperature inside the wood throughout the KD or HT treatment. At the end, a report proves the treatment required by ISPM 15, and the load goes on to export without chemicals.
Companies using the KD/HT Phytosanitary Control: Braslumber, Berneck, Famossul, Imaribo and Tramontina.
- 4sensors: 3 in the air and 1 inside the wood
- ISPM 15meets the international standard
- Load by loadthe history of each treatment
- KD · HTdrying and heat treatment
Companies using KD/HT Phytosanitary Control
Technical specifications of Phytosanitary Control
Standard and measurement
| Standard | ISPM 15 (International Standard for Phytosanitary Measures, IPPC/FAO), current edition |
|---|---|
| Processes | KD (kiln drying) and HT (heat treatment) |
| Sensors | 4 temperature sensors: 3 in the kiln air and 1 inside the wood |
| Sensor accuracy | depends on the PT100 used; for standard market cable sensors (IEC 60751:2022, class B), about ± |
| Report | for phytosanitary certification, signed by the authorized professional; approved by MAPA in Brazil |
Records and certificate
| Records | tracking and recording of every treatment stage |
|---|---|
| Software | data storage and report generation |
| Compatibility | Marrari kiln controllers; other brands after assessment by the team |
| Recording interval | every 1 minute |
| Warranty | 6 months |
Frequently asked questions about phytosanitary treatment
Why do I need phytosanitary treatment?
Does it work with non-Marrari equipment?
Does it generate the certificate required by my country?
What is phytosanitary treatment of wood?
What is the difference between KD and HT?
Does Marrari carry out the phytosanitary treatment?
Which standard does the system meet?
What is the phytosanitary control warranty?
How does buying from outside Brazil work?
No question with that term. Try another word or talk to the team on WhatsApp.
Request a quote: KD/HT Phytosanitary Control
Free and with no obligation. A Marrari specialist replies within 24 business hours.
- Installation and integrationAt your kiln: the Marrari team checks compatibility with the existing controller and installs the sensors and the software.
6-month warrantyFor all Marrari systems and equipment.- Support and calibrationSupport in Brazil and Latin America; new recipes from the UmiLab laboratory.






