Skip to content

Cookie preferences

Choose which optional cookies the site may use. Necessary cookies are always on.

Inline measurement Marrari

In-Line Moisture Meter for Biomass – UmiChip

In-line moisture meter for biomass: it measures wood chips on the belt feeding the boiler, second by second, so you burn better and know the energy coming in.

  • < 3 ppaccuracy on chips and biomass
  • 100 mmreads inside the load
  • Boiler5 readings/s on the conveyor
UmiChip in-line moisture meter for biomass by Marrari
What it is

What is the UmiChip in-line biomass moisture meter?

UmiChip is Marrari’s in-line moisture meter for biomass, for boilers, pulp, pellets and particleboard. A sensor under the belt measures the moisture of the whole material, not just the surface, using the dielectric principle, and the central unit sends the reading to the boiler or process control.

  • 304 stainless steel sensor, IP67 connector
  • Up to 100 recipes
  • For whomBiomass boilers, pulp, pellet and particleboard plants
  • Sensor304 stainless steel, reading up to 100 mm deep
  • RecipesUp to 100, adjusted with the laboratory in Tracker
  • Integration4 × 4–20 mA outputs and Modbus RTU; Ethernet and Profibus optional
Why measure

Why measure biomass moisture in-line?

Wet chips force the boiler to spend energy evaporating water before burning. By measuring on the belt, in real time, you adjust the feed and know the energy the material will deliver. See the articles on biomass.

  • More efficiency: complete combustion, with less fuel for the same steam.
  • Biomass on spec: less incomplete combustion, residue and emissions.
  • Less maintenance: fewer deposits and less corrosion caused by excess moisture.

What does the sensor field see?

The plate emits a field that passes through up to 100 mm of the material. Change the water and the layer and see how the reading becomes moisture, and what that changes in the process.

reach 100 mm layer 100 mm 123
The field (2 and 3) goes through up to 100 mm of chips above the plate (1): it measures moisture inside the load, not just at the surface. That is why the layer over the sensor should be about 100 mm deep; with little material, a collector gathers the sample.

More efficiency: complete combustion, with less fuel for the same steam.

Where the material goes

With moisture on spec, combustion is complete: less fuel for the same steam.

Application

Where is UmiChip installed?

On the conveyor belt, at the dryer, at the boiler feed or at another point on the line where the biomass passes. As an in-line wood chip moisture meter, UmiChip follows moisture second by second, without taking samples, so you can adjust the boiler feed and know the energy coming in.

The most common applications:

Boiler feed · Pulp · Pellets and particleboard · Industrial processes

  • Boiler feedelectricity, heat, cogeneration and water heating.
  • Pulpwood chips on their way to the digester; actual moisture goes into the alkali charge calculation.
  • Pellets and particleboardchips at the line intake, so the raw material arrives at the moisture the process needs.
  • Industrial processesbiomass used as raw material rather than fuel, measured on the belt before the process.
Close-up of the UmiChip sensor installed on the wood chip line
Principle

How does UmiChip measure?

The sensor emits an electric field (dielectric method) that goes through up to 100 mm of the wood chips or biomass passing over it. The water in the material changes that field: the central unit reads the change 5 times per second, compensates for temperature and converts it into moisture with the material’s recipe.

  1. The material passes

    Over the sensor, on the belt or conveyor.

  2. The sensor reads

    5 readings per second, inside the load.

  3. The central unit converts

    Using the material’s recipe curve.

  4. The process adjusts

    With moisture on the 4–20 mA outputs or via Modbus.

Software

Wood chip moisture: what does the UmiChip software show?

On the UmiChip supervisory screen, moisture from each sensor appears in real time, by batch, with reports by period. In Tracker, recipes are adjusted with laboratory samples.

To bring this meter and other plant equipment onto one screen, use the PSi4 supervisory system.

Actual software screen (in Portuguese).
How to read this screen
  1. The bars show the moisture read by each sensor.
  2. The blue bar identifies the batch: supplier, material, product and operator.
  3. The lower chart keeps the reading history, minute by minute.

Enlarged screen

Customers

Who uses UmiChip

On the belt feeding the boiler, UmiChip measures chip and biomass moisture second by second. The operator knows the energy going in, adjusts firing and uses less fuel for the same steam.

Companies using the UmiChip: Suzano, Arauco, Ibema and Reflorestadora Nichele.

  • < 3 ppmoisture accuracy
  • 5/scontinuous readings instead of sampling
  • In real timechip moisture on the conveyor
  • 100 mmreading depth

Companies using UmiChip

  • Suzano
  • Arauco
  • Ibema
  • D'Itália Alimentos
Specifications

UmiChip specifications

Download data sheet (PDF, 329 KB) (opens in a new tab)

Measurement

UmiChip specifications: Measurement
Measuring principledielectric, 5 readings per second, continuous or by collector
Materialswood chips, boiler biomass and chips for pellets and particleboard
Measuring range3 to 150% dry basis or 3 to 70% wet basis; 0.1 percentage point resolution
Accuracybetter than 3 percentage points of moisture
Sensor reachup to 100 mm deep into the material

Installation and integration

UmiChip specifications: Installation and integration
Calibrationup to 100 programmable recipes, adjusted with laboratory samples (Tracker software)
Temperaturesensor up to 70 °C; central unit up to 50 °C; automatic compensation
Outputs and communication4 × 4–20 mA outputs; Modbus RTU (RS232/RS485); Ethernet and Profibus DP optional
Power supply95 to 240 VAC, 50/60 Hz; 500 W max.
ProtectionIP54 central unit; 304 stainless steel sensor (190 × 190 × 91 mm, 170 × 170 mm flange) with IP67 connector
FAQ

Frequently asked questions about the in-line moisture meter

Does the material need to touch the sensor?
Ideally the material passes as close to the sensor as possible, to avoid variations. The sensor reads up to 100 mm deep.
Does UmiChip calculate the net calorific value (NCV)?
It can calculate the NCV in real time, via software, when that function is included in the system: it shows the energy the boiler will generate with the material passing by.
Can I buy the meter with a ready recipe for my product?
Yes. Send a sample to the UmiLab laboratory, which creates the specific recipe for your material. Our team first assesses whether your material can be measured accurately and calibrates the equipment for your product.
Does Marrari offer a biomass assessment?
Yes, free of charge, for anyone generating energy and steam with biomass: the team evaluates how the fuel is used and suggests how to make it more efficient and economical. Request the assessment. Outside Brazil, the assessment is carried out by a consultant from Marrari’s foreign trade (COMEX) team.
What is the UmiChip warranty?
6 months, like all Marrari systems and equipment.
How does buying from outside Brazil work?
Payment is by international wire transfer (SWIFT) or international credit card. Freight can be arranged by the customer, or Marrari handles the entire export. Installation is carried out by the Marrari team or a local authorized partner.
Quote

Request a quote: UmiChip

Free and with no obligation. A Marrari specialist replies within 24 business hours.

  • Installation and integrationBy the Marrari team, at the line point indicated for your process; the recipe calibration is done with the laboratory.
  • 6-month warrantyFor all Marrari systems and equipment.
  • Support and calibrationSupport in Brazil and Latin America; new recipes from the UmiLab laboratory.
Request a quote