Skip to content

Cookie preferences

Choose which optional cookies the site may use. Necessary cookies are always on.

Production control Marrari

Log Classifier and Sorter for Sawmills – Log X

Log classifier and sorter for sawmills: it measures the diameter and length of every log at the infeed and sorts it into the right class, so cutting gets more out of the wood and suppliers are paid for what they delivered.

  • Classesof logs, by diameter and/or length
  • 400–1,000mm log diameter
  • 5 mmresolution, to pay for what is delivered
Log X log classifier and sorter for sawmills by Marrari
What it is

What is the Log X log classifier and sorter?

Log X is a log classifier and sorter for sawmills, made by Marrari in Brazil. An infrared light curtain measures each log at the infeed, and the system sorts it by diameter and/or length into the classes you configure, with the volume logged per supplier.

  • Usually no changes to your line
  • ERP integration
  • For whomSawmills and log yards
  • MeasuresDiameter from 400 to 1,000 mm and length from 0.1 to 3.5 m
  • SortsBy diameter and/or length, in configurable classes
  • ReportsBy supplier, shift and time, with ERP integration
Why measure

Why sort logs by class?

Each final product calls for a type of log. With logs sorted by class, the operator picks the ideal one for each cut, avoids wood losses and unnecessary cuts, and plans production based on what is in the yard.

  • Better yield: similar logs together optimize cutting and reduce waste.
  • Suppliers paid right: volume by class and by supplier, to pay and rate those who deliver.
  • Planned production: the stock of each class shows what can be produced.

How are logs sorted into classes?

Log X measures each log’s diameter at the infeed and sends it to the class you set. The volume is logged per supplier. Change the limits and switch supplier to see the difference in what each one delivers.

Supplier

Each log goes to the class of its diameter range, and the volume is logged per supplier.

Simulation Example values, not readings from equipment.

Application

What does Log X solve?

At the process infeed, where the log can still go to the right line. As a wood classifier at log intake, Log X sorts each log by diameter and length class before cutting, and the yard shows the stock of each class.

The most common applications:

Log sorting · Supplier payment · Cutting line setup · Infeed volume

  • Log sortingclasses by diameter and length, for the best yield.
  • Supplier paymentvolume reports by supplier.
  • Cutting line setupeach class goes to the right cut.
  • Infeed volumea log of what entered the process, by shift and time.
Log X log classifier scanner measuring the logs on the conveyor
Principle

How does sorting work?

An infrared (LED) light curtain reads the log profile as it passes, and the encoder measures travel: with both, the system calculates diameter and length and sends the log to its class.

Video: the Log X log classifier (in Portuguese)
  1. Set up the classes

    Diameter and length ranges, in the software.

  2. Measures every log

    Infrared light curtain and 250-pulse encoder.

  3. Sorts into the class

    The log goes to the right class, automatically.

  4. Logs and reports

    Volume by class, supplier, shift and time.

Software

Log classifier: what does the Log X software show?

On the computer, Log X shows each batch’s logs by length, diameter and class, with totals and volume.

Actual software screen (in Portuguese).
How to read this screen
  1. At the top, batch totals: logs, linear and cubic meters, diameters and target volume.
  2. The charts split logs by length and by diameter.
  3. At the bottom, the logs in each class and the rejected ones. The yellow bar warns when the line stops.

Enlarged screen

Customers

Who uses Log X

At the sawmill infeed, Log X measures the diameter and length of each log and sorts it into the right class. With similar logs together, sawing gets more out of the wood, and the volume per supplier shows how much to pay each one.

Companies using the Log X: AGX Florestal, Eucaflora, Pinustan, Sguario and Laminados AB.

  • 400–1,000mm diameter in the measuring field
  • By supplierthe volume and quality of each load
  • 5 mmresolution
  • Classesby diameter and length

Companies using Log X

  • Reflorestadores Unidos
  • Sguario
  • Embalatec
Specifications

Log X specifications

Download data sheet (PDF, 542 KB) (opens in a new tab)

Measurement and sorting

Log X specifications: Measurement and sorting
Measuring principleinfrared (LED) light curtain and 2-channel encoder (250 pulses)
Sortingby diameter and/or length, in configurable classes
Measuring field400 to 1,000 mm diameter
Measuring range0.1 to 3.5 m; 5 mm resolution
Loggingstatistical production reports; identification by supplier, shift and time

Installation and integration

Log X specifications: Installation and integration
CommunicationRS232 and RS485; ERP integration
Accessmulti-user, with different permission levels
Power supply95 to 240 VAC, 50/60 Hz; 200 W max.
Operating temperatureup to 50 °C
Warranty6 months
FAQ

Frequently asked questions about the log classifier

Can the system automatically classify logs?
Yes: by class and size, all configurable for the logs arriving at your company. With this, you also rate suppliers and require better quality.
Does Marrari software integrate with my system?
Yes: Log X integrates with ERP and production management systems through its RS232 and RS485 ports.
How do I monitor the log classifier?
Through the supervision software: it changes the sorting parameters and shows the volume received, the volume in each class and the data to pay and rate suppliers and plan production.
What is the Log X warranty?
6 months, like all Marrari systems and equipment. Parts and technical support are in Brazil, at the Marrari factory, so maintenance is quick and more affordable.
How does buying from outside Brazil work?
Payment is by international wire transfer (SWIFT) or international credit card. Freight can be arranged by the customer, or Marrari handles the entire export. Installation is carried out by the Marrari team or a local authorized partner.
Quote

Request a quote: Log X

Free and with no obligation. A Marrari specialist replies within 24 business hours.

  • Installation and integrationBy Marrari engineering, at the sawmill infeed; in most cases, without modifying the line.
  • 6-month warrantyFor all Marrari systems and equipment.
  • Support and calibrationSupport in Brazil and Latin America; new recipes from the UmiLab laboratory.
Request a quote