Skip to content

Cookie preferences

Choose which optional cookies the site may use. Necessary cookies are always on.

Production control Marrari

Electronic Setworks for Sawmills

Electronic setworks for sawmills: it positions the carriage or the saws at the programmed size, quickly and accurately, so each piece comes out at the right dimension.

  • 10programmed sizes per axis
  • On sizecarriage or saws, correcting inertia
  • 1 or 2axes per controller
Operator at the Marrari Electronic Setworks panel at the sawmill
What it is

What are electronic setworks for sawmills?

The Electronic Setworks are a position control for wood-cutting machines, made by Marrari in Brazil. The operator picks one of the programmed sizes and the system moves the carriage or the saws to the position, compensating for the stopping inertia. They are setworks for log carriages, twin saws and edgers.

  • Programmable saw lubrication
  • ±1 mm positioning
  • For whomSawmills and wood processing plants
  • MachinesSingle or tandem log carriages, twin saws and edgers
  • Sizes10 per axis, for boards and blocks
  • PositionBy encoder, with adjustable alarm tolerance
Why measure

Why use electronic setworks in the sawmill?

A wrong size becomes a loss: an off-size piece is scrap or rework. With the position set by the system, every cut comes out at the programmed dimension and the machine stops less often.

  • Pieces to size: cuts with the right dimensions, without losses from incorrect sizes.
  • More output: fast positioning, saving time and energy, with fewer stops.
  • Less wear: cutting machines work better and last longer.

What does inertia do to the size?

A carriage does not stop instantly: inertia carries the piece past the mark, and a wrong size becomes scrap or rework. The Electronic Setworks correct the inertia on their own and stop on the size. Raise the speed and compare the two passes.

Without compensation, inertia carries the carriage past the mark; the setworks corrects the stop and stays on size.

The setworks signal by beep: 1, correct position; 2, below the limit; 3, above it. Drawing not to scale: not precision data.

Application

Which machines do the setworks run on?

On wood-cutting machines where fast, accurate saw positioning defines process performance. Marrari engineering evaluates the machine and defines the installation.

The most common applications:

Single log carriage · Tandem log carriage · Twin saws · Edgers · Multi-axis machines

  • Single log carriagecarriage position for each cut of the log.
  • Tandem log carriagetwo controlled axes, with the dual controller.
  • Twin sawssaw opening to the piece size.
  • Edgerspiece width at the programmed size.
  • Multi-axis machines10 sizes per axis, for boards and blocks.
Logs on the carriage controlled and positioned by the electronic setworks
Principle

How does positioning work?

An encoder measures the travel of the carriage or the saws, and the controller (PLC with keypad and display) compares it with the chosen size and stops on target, automatically correcting the stopping inertia.

  1. Program the sizes

    Up to 10 per axis, plus the saw kerf.

  2. Choose the size

    On the controller keypad, piece by piece.

  3. The system positions

    By the encoder, with automatic inertia compensation.

  4. Cut to size

    With an alarm when the position leaves the tolerance.

Customers

Who uses the setworks

At the sawmill, the Electronic Setworks system positions the carriage or saws at the programmed size, correcting for inertia. Each piece comes out at the right dimension, with less loss from sizing errors and less downtime between cuts.

Companies using the Electronic Setworks: Rohden Portas, Ipa Pisos da Amazônia, Madeireira Poletti and Maderera Boliviana Etienne.

  • Cut to sizeevery cut comes out at the programmed dimension
  • 10 settingsprogrammed per axis
  • Inertiastop compensated automatically
  • 1 or 2 axesper controller

Companies using Electronic Setworks

  • Rohden Portas
  • Maderera Boliviana Etienne (Mabet)
Specifications

Electronic Setworks specifications

Positioning

Electronic Setworks specifications: Positioning
Functionlinear positioner for wood-cutting machines
Versionssingle (1 axis) and dual (2 axes)
Programmed sizes10 per axis; modes for boards and for blocks
Position readingencoder, with an adjustable ratio of pulses per millimeter
Positioning accuracy±1 mm
Compensationautomatic stopping inertia correction; one-way or two-way positioning

Operation and installation

Electronic Setworks specifications: Operation and installation
Cutting settingssaw kerf, stop thickness and reference opening
Alarmsminimum and maximum position tolerance, in mm
Lubricationof the saws, with programmable interval and duration
ControllerPLC with keypad and display, digital inputs and outputs
Power supply220/380 VAC, 500 VA
CommunicationModbus TCP; other options on request
Warranty6 months
FAQ

Frequently asked questions about the electronic setworks

Does Marrari software integrate with my system?
Yes. Marrari software integrates with ERP and production and plant management systems. The Electronic Setworks communicate via Modbus TCP; other options on request.
What is setting (sizing) in a sawmill?
It is adjusting the saw or carriage position so the piece comes out at the desired thickness. Electronic setworks make this adjustment automatically, at the programmed size.
What is the setworks warranty?
6 months, like all Marrari systems and equipment. Parts and technical support are in Brazil, at the Marrari factory, so maintenance is quick and more affordable.
How does buying from outside Brazil work?
Payment is by international wire transfer (SWIFT) or international credit card. Freight can be arranged by the customer, or Marrari handles the entire export. Installation is carried out by the Marrari team or a local authorized partner.
Quote

Request a quote: Electronic Setworks

Free and with no obligation. A Marrari specialist replies within 24 business hours.

  • Installation and integrationCustomized: Marrari engineering evaluates the machine and tells you whether it needs adaptation; in most cases, it does not.
  • 6-month warrantyFor all Marrari systems and equipment.
  • Support and calibrationSupport in Brazil and Latin America; new recipes from the UmiLab laboratory.
Request a quote