
Industrial biomass boilers are now a great option in environmental and
Use good-quality fuel
Fuel quality is one of the main factors affecting the efficiency of a biomass boiler. Moisture is one of the factors with the greatest impact on fuel quality, so check the moisture content of the biomass before burning it, using a reliable moisture meter. Make sure the fuel is dry and free of impurities such as soil, sand and stones. Impurities impair combustion, increase ash formation and reduce boiler efficiency.

Carry out regular preventive maintenance
Preventive maintenance is essential to keep the boiler running well and avoid unplanned shutdowns. Inspect it periodically to find and fix problems before they cause greater damage. Replace worn parts, clean the combustion system and check the feedwater treatment, which prevents scale
Control excess air
Excess combustion air lowers boiler efficiency, because the air entering the combustion chamber absorbs heat, lowers the flame temperature and carries more energy out through the stack. On the other hand, too little air causes incomplete combustion. That is why it is important to control the amount of air entering the boiler: use an oxygen analyzer on the flue gas to monitor excess air and adjust the air supply as needed.
Clean out ash properly
Ash formation is unavoidable when burning biomass, but excessive
Optimize heat recovery
Heat recovery lets you use the heat generated by the boiler to warm other processes or systems in the plant. Check that the boiler has an efficient heat exchanger and that the heat recovery system is optimized to make the most of the heat generated.

Control boiler pressure
Boiler pressure is critical to safe and efficient operation. Check that the boiler runs at the correct pressure, always below the maximum allowable working pressure set by the manufacturer and local regulations, and adjust it as needed. Overpressure increases the risk of leaks and damage, while insufficient pressure impairs performance and reduces energy efficiency. Use a pressure gauge to monitor boiler pressure and make the necessary adjustments.
Use an automation system
Boiler automation helps ensure more efficient and safer operation. Use an automated control system to monitor and automatically adjust temperature, pressure and air supply, for example. This helps reduce fuel consumption and maximize boiler efficiency. See EcoSteam, Marrari’s complete boiler automation solution.

Invest in staff training
A
Conclusion
An industrial biomass boiler can be an excellent option for heating and for energy and steam production, as long as it is run efficiently and sustainably. Use
Get a free biomass assessment for more efficiency and savings
Marrari offers a free assessment for companies that generate power and steam from biomass, showing how to use it as efficiently and economically as possible, with solutions, methods and ideas to improve your process. Book your free assessment.
Did you like this article?
Could this article help someone on your team? Send the link to a colleague:



