Skip to content

Cookie preferences

Choose which optional cookies the site may use. Necessary cookies are always on.

Grain in the intake pit on its way to the dryer, where UmiGrain measures moisture in-line

For grain elevator, dryer and cooperative managers

How much grain weight do you recover drying to the target?

Enter the dryer flow and the outlet and sale moisture: in 1 minute, the moisture shrink in tonnes, in 60 kg bags and in money over the season.

  • Result in bags and money
  • Open formula
  • With your dryer’s data
In your day-to-day

At harvest peak, with the intake pit full

  1. Grain dryer and silos at a storage facility

    It is common to dry a little past the target “just to be safe”. Every point below the target is moisture shrink: water leaving the dryer and taking the weight you sell with it.

  2. Bags of grain stacked in the warehouse

    The bags in the drawing below are that water turned into product: 60 kg bags, added up over the whole season.

  3. UmiGrain sensor installed on the grain dryer

    With an in-line grain moisture meter on the dryer, the operator sees the deviation right away and adjusts before going past the target.

X-ray

Your numbers, in plain view

  • 60 kg bags that leave as water
Run the numbers: the result shows up here in the X-ray.

How much do you lose drying grain past the target?

Your details unlock this calculation and the other 5 calculators. If you wish, a Marrari specialist can help you read the result.

By continuing, you agree to the terms of use and privacy. Marrari uses your data only to contact you about your solution.

The fields start with the page example (100 t/h, 24 h per day, drying 1 point below target). Enter the season length and the grain price, and replace them with your own drying numbers.

—

Per day—
Per season—
How the calculation works

Grain dry matter does not change during drying; only water leaves. So: loss (t/h) = flow × (Mtarget − Mactual) ÷ (100 − Mactual), with moisture in % wet basis and the grain flow at the dryer outlet. This is the classic water shrink formula used in grain drying tables. Example: 100 t/h, 13% target and 12% at the outlet → 100 × 1 ÷ 88 ≈ 1.14 t/h (1,136 kg per hour). The rule of thumb “1% of 100 t/h = 1,000 kg per hour” is about 12% below the exact calculation. In bags: bags = tonnes × 1,000 ÷ 60; the value is bags × price per bag.

This only estimates the extra water removed. It does not include dry matter handling loss, extra dryer energy or commercial discounts, which vary by contract, so the real loss tends to be higher.

Companies that use UmiGrain

  • Bunge
  • Cargill
  • Copasul
  • 3tentos
Next step

Want to see grain moisture right away, at the dryer?

Send your result to an in-line grain moisture measurement specialist or ask for a UmiGrain quote.

The equipment that measures this

Go deeper

Free e-bookReal-time grain and seed moisture measurementGet it by e-mail
Request a quote