1st Wood Drying Course 2022 – Lages / SC
Course in Lages/SC, May
Ended This event has already taken place (May
The 2022 wood drying course, in a hybrid format
The wood drying course by CPM Suporte and Marrari is today the market’s leading reference for content for the wood sector, specifically wood drying.
With the experience and training of speaker Juan F. Costa, director of CPM Suporte Ltda., a wood drying specialist, the course covered how to take a company’s wood drying to new levels, with the newest software and techniques and with Marrari equipment such as EcoPower,
About the wood drying course
The course returned, for the first time in 2 years, to the
Support material was provided as a PDF or in print, depending on the format.
VENUE AND DATES
The course was held online, on Zoom, and in person in the SENAI auditorium in Lages – SC (R. Archilau Batista do Amaral, 745 – Universitário,
It was held from May 3 to 6, from 8:00 a.m. to 6:00 p.m., with a
With 6 hours of course per day, for a total of 24 course hours.
WOOD DRYING COURSE CONTENT
Drying, main elements
Temperature, relative humidity, air speed
Wood/moisture relationship
What moisture content in wood is
Equilibrium moisture content, concept
Dew point
Air’s capacity to absorb water vapor
Dew point calculation
Water in wood
Movement of water in wood
Free or capillary water
Water in the cell wall, bound water, chemical or hygroscopic water
Wood anisotropy in drying
Anisotropy of materials
Anisotropy in the tangential, radial and oblique planes
Shrinkage/swelling
Calculating tangential and radial shrinkage, examples
Elasticity and plasticity
Examples of shrinkage, swelling and linear contractibility
Wood moisture / density calculations
Calculating wood moisture content
Calculating wood density
Forces or stresses in wood
Reaction or tension wood
Macroscopic characteristics of wood
Types of sawmill cuts: tangential, radial and mixed
Wood drying kilns: types, characteristics, components
Metal and masonry structures
Conventional
Examples (videos)
Components of a wood drying kiln
Fans, direct start, start with inverters, start with soft starter
Frequency inverters in drying (debate, exchange of ideas)
Cold air, hot air, differences
Psychrometer, concept
Functions of PT 100 thermometer sensors
Psychrometric table, how to use it
Actuators and peripherals, valves, dampers, steam traps: types.
Valves, types
Dampers, types
Damper actuators (motors)
Condensate drain problems
Steam traps, types
Steam traps, correct installation
PID control of heating valves and dampers
NEW TOPIC: condensate tank (eliminating steam traps), types, models, advantages, disadvantages, direct injection into the boiler, drain to the boiler tank.
Operating kilns
TBU, correct maintenance
Bad habits to avoid
Moisture points in wood
Most common mistakes
Preparing the sensor pins
Types of sensor pins, domestic and imported
Moisture sensor cables
Most common mistakes
Loading the kilns
Principles of aerodynamics
Stickers, sizes, recommendations
Drains
Doors, sealing
Humidification, types (conditioning)
Live steam, advantages, disadvantages
Steam quality, ideal steam temperature for conditioning, water in the steam.
Conclusions
Hot water (sprinklers), advantages, disadvantages
Conclusions
Indirect steam (tub), advantages, disadvantages
Conclusions
Drying quality controls
Drying quality controls
Final moisture control
Wood stress control, measurement
Crack control, measurement
Moisture meters
Examples of poorly and well conditioned wood
Building and adapting drying curves for each type of final product (painted and unpainted furniture, doors, frames, packaging, etc.).
Heating, times, conditioning, etc.
Drying, ramps, temperatures for each type of final product.
Equalization
Conditioning
Cooling, how to cool each type of wood for each type of product
Intermediate conditioning
Course for all of Latin America, in Spanish: LATAM Wood Drying Course
- Date
- Venue
- R. Archilau Batista do Amaral, 745 - Universitário, Lages - SC,
88511-095
View on map (opens in a new tab) - Type
- Course

Want to hear about the next ones?
See Marrari’s calendar of trade fairs, courses and trainings or talk to the team.