2nd Wood Drying Course 2020
Course online, Nov
Ended This event has already taken place (Nov
Even in these difficult times, the wood sector is growing. That is why we decided to run another course to help people like you dry wood and better understand and manage the entire wood drying process, with professor and instructor Juan F. Costa Paoli, from CPM Suporte Técnico.
The course was fully online, for everyone’s safety, with room for questions, doubts and direct conversations with the instructor.
The platform used was Zoom, with a scheduled link for each registered participant.
Support material was provided as a PDF during the course.
Feedback and questions
The program included, one week after the course, a day just for questions and feedback with the professor, after a week of applying what was learned.
VENUE AND DATES
The course was fully digital, on the Zoom platform, with an access link sent to each participant.
It was held on November 10, 11 and 12, from 8:30 a.m. to 5:00 p.m.
CONTENT
Drying, main elements
Temperature, relative humidity, air speed
Wood/moisture relationship
What moisture content in wood is
Equilibrium moisture content, concept
Dew point
Air’s capacity to absorb water vapor
Dew point calculation
Water in wood
Movement of water in wood
Free or capillary water
Water in the cell wall, bound water, chemical or hygroscopic water
Wood anisotropy in drying
Anisotropy of materials
Anisotropy in the tangential, radial and oblique planes
Shrinkage/swelling
Calculating tangential and radial shrinkage, examples
Elasticity and plasticity
Examples of shrinkage, swelling and linear contractibility
Wood moisture / density calculations
Calculating wood moisture content
Calculating wood density
Forces or stresses in wood
Reaction or tension wood
Macroscopic characteristics of wood
Types of sawmill cuts: tangential, radial and mixed
Wood drying kilns: types, characteristics, components
Metal and masonry structures
Conventional
Examples (videos)
Components of a wood drying kiln
Fans, direct start, start with inverters, start with soft starter
Frequency inverters in drying (debate, exchange of ideas)
Cold air, hot air, differences
Psychrometer, concept
Functions of PT 100 thermometer sensors
Psychrometric table, how to use it
Actuators and peripherals, valves, dampers, steam traps: types.
Valves, types
Dampers, types
Damper actuators (motors)
Condensate drain problems
Steam traps, types
Steam traps, correct installation
PID control of heating valves and dampers
NEW TOPIC: condensate tank (eliminating steam traps), types, models, advantages, disadvantages, direct injection into the boiler, drain to the boiler tank.
Operating kilns
TBU, correct maintenance
Bad habits to avoid
Moisture points in wood
Most common mistakes
Preparing the sensor pins
Types of sensor pins, domestic and imported
Moisture sensor cables
Most common mistakes
Loading the kilns
Principles of aerodynamics
Stickers, sizes, recommendations
Drains
Doors, sealing
Humidification, types (conditioning)
Live steam, advantages, disadvantages
Steam quality, ideal steam temperature for conditioning, water in the steam.
Conclusions
Hot water (sprinklers), advantages, disadvantages
Conclusions
Indirect steam (tub), advantages, disadvantages
Conclusions
Drying quality controls
Drying quality controls
Final moisture control
Wood stress control, measurement
Crack control, measurement
Moisture meters
Examples of poorly and well conditioned wood
Building and adapting drying curves for each type of final product (painted and unpainted furniture, doors, frames, packaging, etc.).
Heating, times, conditioning, etc.
Drying, ramps, temperatures for each type of final product.
Equalization
Conditioning
Cooling, how to cool each type of wood for each type of product
Intermediate conditioning
Course for all of Latin America, in Spanish: LATAM Wood Drying Course
- Date
- Venue
- Online · Zoom - Video conference and webinar
- Type
- Course

Want to hear about the next ones?
See Marrari’s calendar of trade fairs, courses and trainings or talk to the team.